Bindings are what attach your boot to the ski and, at the same time, release it when you fall. That balance between holding you in place and releasing you is controlled by a number: the DIN value. It’s one of the most important settings for your safety and, even if you don’t have to adjust it yourself, it’s worth understanding what it is.
What do the fixings do?
A binding consists of two parts: the toe piece, which secures the front of the boot and opens outwards when you twist, and the heel piece, which secures the heel and opens upwards when you fall forwards. Their job is to keep the boot secure whilst you’re skiing and to release it in the event of a fall before the force reaches your knee or ankle.
What is the DIN value?
This is the force required to release the binding. It is indicated on a small numerical scale on the toe piece and heel piece. A low value releases the boot easily; a high value requires more force.
- Too loose: the binding comes undone for no reason, when turning or hitting a bump. Losing a ski whilst skiing is also dangerous.
- Too high: the binding does not release in a fall and all the torque is transferred to the leg.
What determines your worth?
There is no single ‘beginner’ or ‘expert’ level that applies to everyone. It is calculated on the basis of various factors:
- Weight.
- Height.
- Age (below a certain age and from a certain age onwards, it is adjusted downwards).
- Level and style: skiing gently down green runs is not the same as skiing fast and aggressively.
- The length of the boot’s sole, which is engraved on the side of the boot itself, in millimetres.
Using this information, the technician refers to the tables in the binding adjustment standard (ISO 11088) or the manufacturer’s specifications and adjusts the toe and heel pieces. They also check that the boot fits properly and that the forward pressure is correct.
Why you shouldn’t touch it yourself
It’s tempting to tighten the bindings a notch ‘so they don’t come loose’, or to loosen them because you’ve fallen and struggled to get back up. Don’t do it. Adjusting your bindings is a technical job: a mistake either way increases the risk of injury. If you notice that your binding is too loose or too tight, mention it and have a technician check it.
Be honest about your level
When you book, we ask for your weight, height, age and ability level. Many skiers choose a higher level ‘just in case’ or opt for a lower one to be on the safe side. It’s best to be honest: how you ski today, not how you skied ten years ago or how you’d like to ski. This information goes straight into the adjustment of your bindings.
Snowboarding: no DIN rating, but with adjustment
Snowboard bindings don’t release during a fall, so they don’t have a DIN rating. However, you do need to adjust the angle, the distance between your feet and the straps to fit your boots. We explain this in the snowboard hire guide.
How to put on and take off your bindings
- Clear the sole of your boot of snow and ice by tapping it with your walking stick. If snow is stuck to it, the boot won’t fit properly.
- First, insert the toe of the boot into the toe of the binding.
- Press your heel down firmly until you hear the heel cup ‘click’ into place.
- To take off your shoes, press the rear lever on the heel rest with your walking stick or your hand and slide your heel out.
If your boot won’t go on, don’t force it: there’s almost always snow on the sole or in the binding.
Quick checks you can do yourself
You don’t need to change any settings, but there are a few things you should keep an eye on:
- Make sure the brakes on your skis are fully released when you take your boots off.
- Make sure there is no accumulated ice under the boot or on the binding.
- The boot should feel secure, with no slack, when you move it with your hand.
If something isn’t working properly, don’t ski with it: let us know and we’ll have it checked.
If you change your boots, you’ll need to readjust them
The adjustment of the bindings depends on the length of your boot’s sole. If you change boots partway through your holiday – even if it’s only half a size – the bindings will need to be readjusted. This is one of the reasons why it’s best to make the change through us rather than swapping material with friends.
Frequently asked questions about the DIN value
What DIN rating do I need?
It depends on your weight, height, age, ability level and the length of your boot’s sole. There is no standard size: the technician calculates it using the tables in the standard.
Can I increase my DIN setting if my skis come loose?
Don’t adjust it yourself. The boot might not be fitted properly, or there might be snow on the sole. Let someone know and have a technician check it.
Do the children’s bindings adjust as well?
Yes, just like the ones for adults, and with their own details regarding weight, height, age and level.
What is the sole length of the boot?
This is the measurement, in millimetres, of the boot’s sole, which is engraved on the side. The binding is adjusted to this measurement.
Your bindings, fitted by a technician to suit your boot and your skill level. Book your material and we’ll have everything ready at your accommodation.